General terms and conditions Privacy policy Shipping Imprint Contact us

Product details

Category: Product catalogue / MODEL AIRCRAFT / Iron-on film / Oracover / Scale colours / scale white

ORACOVER width: 60 cm length: 20 m

scale white

Description

item number: 22-010-020

IMPORTANT INFORMATION:

Do not run the RX aerial underneath ORACOVER® Scale or ORASTICK® Scale films as the back of
these Scale films is metallised with a very thin aluminium layer which may disturb the reception of signals.

A special feature of ORACOVER® SCALE: ALL colours are 100 % opaque.
No matter what colour or pattern the surface below is, it never, ever shows through. We guarantee it!

ORACOVER®, our leading product for covering RC model airplanes is patented worldwide.
The unique qualities of ORACOVER®: Permits re-positioning without fear of colour-layer separation - the only covering film giving you a second chance, it is fuel-resistant, tolerates temperatures up to 250°C, can be painted and is highly adhesive.
Applied according to instructions there will be no bubbles and no sagging.

RECOMMENDED ACCESSORY :
________________________________

ORACOVER® Hotmelt Adhesive

5.50 €

Unstable wood fibres can become insecure and can rip off due to the weight.
The consequences would be wrinkling and in the worst case the complete peeling off of the fabric.

Our tip:

For an optimal pre-treatment of your wood surface we recommend to coat the surfaces to be ironed
with ORACOVER® Hotmelt Adhesive.
The ORACOVER® Hotmelt Adhesive penetrates the wood and sticks together the loose wood fibres of the heartwood.
With that you reach an excellent three-D adhesion of the ORACOVER® film with the surface.
With the ORACOVER® Hotmelt Adhesive you do not need a further pre-treatment of the wood anymore.

Application of the ORACOVER® Hotmelt Adhesive:

1. Sand your wood completely and remove the swarf (vacuum).
2. Stir up well the contents of the tin.
3. Apply the ORACOVER® Hotmelt Adhesive 1 – 2 times thinly and evenly by using a brush.
4. Let the adhesive dry overnight, however at least 10 hours. (Please do not resand).
5. Cover your model as always with the thermal shrink fabric covering ORACOVER®.

Productivity: approx. 1 tin / 1m²

Unsuitable for surfaces which are not resistant to organic solvents.

ORACOVER® SPECIAL THINNER

If our adhesives should dry a little bit in open containers,
the adhesive can be adjusted again to brushing viscosity with the corresponding thinner.

4.95 €

239.00 €

basic price: 11.95 € / 1 m

price incl. 19.00% VAT + shipping

Key to inventory overview

Not available

Limited availability

Article is in stock

Accessories

ORACOLOR 100 ml
scale white

11.95 €

Article is in stock

Question to this article

Please enter your question and we will response immediately

Your name
E-Mail address
Your question
	please type the security-code

Customers who bought this item also bought

	ORACOVER Iron-on adhesive (100 ml)	5.50 € Amount
	ORACOVER Special thinner for Iron-on adhesive (250 ml)	4.95 € Amount
	Felt blade	6.95 € Amount
	ORACOLOR 100 ml Filler	7.65 € Amount
	ORACOLOR 100 ml scale white	11.95 € Amount
	ORACOLOR 50 ml Hardener for spraying	7.65 € Amount
	ORACOLOR 250 ml Thinner	8.75 € Amount
	ORASTICK width: 60 cm length: 2 m fluorescent signal orange	25.90 € Amount
	ORALINE width: 3 mm length: 15 m silver	6.50 € Amount
	ORALINE width: 5 mm length: 15 m silver	7.50 € Amount
	ORALINE width: 3 mm length: 15 m grey	6.50 € Amount
	ORALINE width: 5 mm length: 15 m grey	7.50 € Amount

Legal notice:

* Our offer is aimed at final consumers. Therefore, all quoted prices include 19 % German VAT. Transport costs will be charged on top of that.

Pictures may differ from the original products. We cannot assume any liability for the product information given. Accessories shown in the pictures are not included in the delivery. All logos, descriptions and trademarks are property of the respective manufacturer. Subject to change and prior sale. Errors excepted.