General terms and conditions Privacy policy Shipping Imprint Contact us

Product details

Category: Product catalogue / MODEL AIRCRAFT / Textile covering / Oratex / silver

ORATEX width: 60 cm length: 10 m

silver

Description

item number: 10-091-010

ORATEX®, an iron-on type polyester fabric covering, is ideal for all scale models, large scale models and historical models.

ORATEX® has 5 points in its favour:
1. Easy application: due to its pliability and a shrinkage of 5 % in both directions ORATEX® is easy to apply round corners and edges. Creases can easily be removed with a heat-gun.
2. Excellent adhesion: the adhesive of ORATEX® is about twice as strong as that of conventional fabric coverings.
3. Remarkable toughness and stability of the fabric.
4. Protective seal: the surface of ORATEX® has been treated to make it resistant to fuel and oil. You can paint or varnish it if you wish, but there is no need for it!
5. 8 attractive colours.

RECOMMENDED ACCESSORY :
________________________________

ORATEX® Hotmelt Adhesive

6.95 €

Unstable wood fibres can become insecure and can rip off due to the weight.
The consequences would be wrinkling and in the worst case the complete peeling off of the fabric.

Our tip:

For an optimal pre-treatment of your wood surface we recommend to coat the surfaces to be ironed
with ORATEX® Hotmelt Adhesive.
The ORATEX® Hotmelt Adhesive penetrates the wood and sticks together the loose wood fibres of the heartwood.
With that you reach an excellent three-D adhesion of the ORATEX® fabric with the surface.
With the ORATEX® Hotmelt Adhesive you do not need a further pre-treatment of the wood anymore.

Application of the ORATEX® Hotmelt Adhesive:

1. Sand your wood completely and remove the swarf (vacuum).
2. Stir up well the contents of the tin.
3. Apply the ORATEX® Hotmelt Adhesive 1 – 2 times thinly and evenly by using a brush.
4. Let the adhesive dry overnight, however at least 10 hours. (Please do not resand).
5. Cover your model as always with the thermal shrink fabric covering ORATEX®.

Productivity: approx. 1 tin / 1m²

Unsuitable for surfaces which are not resistant to organic solvents.

ORATEX® SPECIAL THINNER

If our adhesives should dry a little bit in open containers,
the adhesive can be adjusted again to brushing viscosity with the corresponding thinner.

4.65 €

119.50 €

price incl. 19.00% VAT + shipping

Key to inventory overview

Not available

Limited availability

Article is in stock

Accessories

	ORATEX Hotmelt adhesive (100 ml)	6.95 € Amount
	ORATEX Hotmelt adhesive (1 l)	35.00 € Amount
	ORACOLOR 100 ml ORATEX silver	10.95 € Amount

Customers who bought this item also bought

	ORATEX Hotmelt adhesive (100 ml)	6.95 € Amount
	ORATEX width: 60 cm length: 2 m silver	25.90 € Amount
	ORATEX Pinked edge tape width: 17 mm length: 25 m silver	29.95 € Amount
	ORACOVER width: 60 cm length: 10 m white	99.50 € Amount
	ORACOVER width: 60 cm length: 2 m dark blue	21.90 € Amount
	ORACOVER width: 60 cm length: 2 m red	23.30 € Amount
	ORACOVER width: 60 cm length: 2 m black	21.90 € Amount

Question to this article

Please enter your question and we will response immediately

Your name
E-Mail address
Your question
	please type the security-code

Legal notice:

* Our offer is aimed at final consumers. Therefore, all quoted prices include 19 % German VAT. Transport costs will be charged on top of that.

Pictures may differ from the original products. We cannot assume any liability for the product information given. Accessories shown in the pictures are not included in the delivery. All logos, descriptions and trademarks are property of the respective manufacturer. Subject to change and prior sale. Errors excepted.