Article in stock ORACOVER MAGIC iron-on film - width: 60 cm - length: 2 m fantasy violet

item number: 521-101-002

96.55 €

Basic price 48.28 € / 1 m
incl. 19% VAT plus Shipping to Germany / Deutschland
Quantity

Description

ORACOVER® MAGIC is the ultimate product in high tech colour technology. The multi-tone colour changes due to the holographic technology in a vibrant shine.

ORACOVER®, our leading product for covering RC model airplanes is patented worldwide. The unique qualities of ORACOVER®: Permits re-positioning without fear of colour-layer separation - the only covering film giving you a second chance, it is fuel-resistant, tolerates temperatures up to 250°C, can be painted and is highly adhesive. Applied according to instructions there will be no bubbles and no sagging.


Note: The processing instructions for this article can be found in the download section.

RECOMMENDED ACCESSORY : ________________________________ ORACOVER® Hotmelt Adhesive

ORACOVER Hotmelt adhesive 10.60 €

Unstable wood fibres can become insecure and can rip off due to the weight. The consequences would be wrinkling and in the worst case the complete peeling off of the fabric.

Our tip:

For an optimal pre-treatment of your wood surface we recommend to coat the surfaces to be ironed with ORACOVER® Hotmelt Adhesive. The ORACOVER® Hotmelt Adhesive penetrates the wood and sticks together the loose wood fibres of the heartwood. With that you reach an excellent three-D adhesion of the ORACOVER® film with the surface. With the ORACOVER® Hotmelt Adhesive you do not need a further pre-treatment of the wood anymore.

Application of the ORACOVER® Hotmelt Adhesive:

1. Sand your wood completely and remove the swarf (vacuum). 2. Stir up well the contents of the tin. 3. Apply the ORACOVER® Hotmelt Adhesive 1 – 2 times thinly and evenly by using a brush. 4. Let the adhesive dry overnight, however at least 10 hours. (Please do not resand). 5. Cover your model as always with the thermal shrink fabric covering ORACOVER®.

Productivity: approx. 1 tin / 1m²

Unsuitable for surfaces which are not resistant to organic solvents.

ORACOVER® SPECIAL THINNER

If our adhesives should dry a little bit in open containers, the adhesive can be adjusted again to brushing viscosity with the corresponding thinner.

ORACOVER Special thinner for hotmelt adhesive 12.05 €


Application instruction: Download

Technical datas

Type of Application Iron-on
Type of Article Film
Width in mm 600
Colour Code 101
Colour fantasy violet
Colour Series Magic
Length in m 2

Accessories

Scalpel Scalpel 48.35 € Article in stock

Quantity
ORACOVER Felt blade - 7 x 10 cm ORACOVER Felt blade - 7 x 10 cm 10.45 € Article in stock

Quantity
Cutting knife Cutting knife 2.00 € Article in stock

Quantity
Transfer film - width: 30 cm - Roll: 50 m Transfer film - width: 30 cm - Roll: 50 m 52.25 €
Basic price 0.52 € / 1 m
Article in stock

Quantity
Transfer film - width: 60 cm - Roll: 100 m Transfer film - width: 60 cm - Roll: 100 m 150.43 €
Basic price 1.50 € / 1 m
Article in stock

Quantity
ORATEX Felt blade - 10 x 14 cm ORATEX Felt blade - 10 x 14 cm 14.45 € Article in stock

Quantity

Question about this article

Please enter your question and we will response immediately

Legal notice:

* Our offer is aimed at final consumers. Therefore, all quoted prices include 19 % German VAT. Transport costs will be charged on top of that.

Pictures may differ from the original products. We cannot assume any liability for the product information given. Accessories shown in the pictures are not included in the delivery. The trademarks mentioned on this website and in our advertising materials, e.g. ORACOVER, ORASTICK, ORALIGHT, ORALINE, ORATRIM, EASYCOAT, EASYPLOT, ORATEX, CARBON are registered trademarks, the use of which is reserved exclusively to Lanitz Prena Folien Factory. All other logos, descriptions and trademarks are property of the respective manufacturer. Subject to change and prior sale. Errors excepted.

Lade ...