ORASTICK self adhesive film - width: 60 cm - length: 10 m - design-black
172.45 €
Description
ORACOVER® Design-Black
This Design-Black is a new development. The aim of this development was to create a film with an indestructible coat of paint as the black films are often used to make registration numbers in General Aviation. These registration numbers made of film are exposed to particularly high loadings. In order to meet our demands on the quality of our products, we have gone a special way and, similar to our transparent-coloured films, the colour is integrated into the film. Therefore, film and colour build a complex system that can be harmed only by destroying the film.
ORASTICK® pressure-sensitive, heat-set, self-adhesive covering film.
ORASTICK® and ORACOVER® share the same unique qualities and can easily be applied together on the same model. The main difference is the adhesive: while the ORACOVER® adhesive is thermo-active, ORASTICK® is self-adhesive.
The ORASTICK® standard range comprises 28 colours which have been exceedingly popular for years.
Note: The processing instructions for this article can be found in the download section.
RECOMMENDED ACCESSORY : ________________________________ ORASTICK® Hotmelt Adhesive
Unstable wood fibres can become insecure and can rip off due to the weight. The consequences would be wrinkling and in the worst case the complete peeling off of the fabric.
Our tip:
For an optimal pre-treatment of your wood surface we recommend to coat the surfaces to be ironed with ORASTICK® Hotmelt Adhesive. The ORASTICK® Hotmelt Adhesive penetrates the wood and sticks together the loose wood fibres of the heartwood. With that you reach an excellent three-D adhesion of the ORASTICK® film with the surface. With the ORASTICK® Hotmelt Adhesive you do not need a further pre-treatment of the wood anymore.
Application of the ORASTICK® Hotmelt Adhesive:
1. Sand your wood completely and remove the swarf (vacuum). 2. Stir up well the contents of the tin. 3. Apply the ORASTICK® Hotmelt Adhesive 1 – 2 times thinly and evenly by using a brush. 4. Let the adhesive dry overnight, however at least 10 hours. (Please do not resand). 5. Cover or design your model as always with the thermal shrink fabric covering ORASTICK®.
Productivity: approx. 1 tin / 1m²
Unsuitable for surfaces which are not resistant to organic solvents.
ORASTICK® SPECIAL THINNER
If our adhesives should dry a little bit in open containers, the adhesive can be adjusted again to brushing viscosity with the corresponding thinner.
12.05 €
Application instruction: Download
Technical datas
Type of Application | Self-Adhesive |
Type of Article | Film |
Width in mm | 600 |
Colour Code | 072 |
Colour | design-black |
Colour Series | standard |
Length in m | 10 |
Accessories
ORACOVER Hotmelt adhesive
100 ml |
10.60 €
Basic price 106.00 € / 1 L
|
|
ORASTICK Bonding emulsion
100 ml |
13.25 €
Basic price 132.50 € / 1 L
|
|
ORASTICK Special thinner for bonding emulsion
250 ml |
12.05 €
Basic price 48.20 € / 1 L
|
Legal notice:
* Our offer is aimed at final consumers. Therefore, all quoted prices include 19 % German VAT. Transport costs will be charged on top of that.
Pictures may differ from the original products. We cannot assume any liability for the product information given. Accessories shown in the pictures are not included in the delivery. The trademarks mentioned on this website and in our advertising materials, e.g. ORACOVER, ORASTICK, ORALIGHT, ORALINE, ORATRIM, EASYCOAT, EASYPLOT, ORATEX, CARBON are registered trademarks, the use of which is reserved exclusively to Lanitz Prena Folien Factory. All other logos, descriptions and trademarks are property of the respective manufacturer. Subject to change and prior sale. Errors excepted.