Do not run the RX aerial underneath ORACOVER® Scale or ORASTICK® Scale films as the back of these Scale films is metallised with a very thin aluminium layer which may disturb the reception of signals.
ORASTICK® Scale Colours have exactly the same qualities as ORACOVER® films. As a special feature all ORASTICK® Scale Colours are 100 % opaque, no matter which colour or pattern is underneath. The background does not show through. We guarantee it!
ORASTICK® pressure-sensitive, heat-set, self-adhesive covering film ORACOVER® and ORASTICK® share the same unique qualities and can easily be applied together on the same model. The main difference is the adhesive: while the ORACOVER® adhesive is thermo-active, ORASTICK® is self-adhesive.
Note: The processing instructions for this article can be found in the download section.
RECOMMENDED ACCESSORY : ________________________________ ORASTICK® Hotmelt Adhesive
Unstable wood fibres can become insecure and can rip off due to the weight. The consequences would be wrinkling and in the worst case the complete peeling off of the fabric.
For an optimal pre-treatment of your wood surface we recommend to coat the surfaces to be ironed with ORASTICK® Hotmelt Adhesive. The ORASTICK® Hotmelt Adhesive penetrates the wood and sticks together the loose wood fibres of the heartwood. With that you reach an excellent three-D adhesion of the ORASTICK® film with the surface. With the ORASTICK® Hotmelt Adhesive you do not need a further pre-treatment of the wood anymore.
Application of the ORASTICK® Hotmelt Adhesive:
1. Sand your wood completely and remove the swarf (vacuum). 2. Stir up well the contents of the tin. 3. Apply the ORASTICK® Hotmelt Adhesive 1 – 2 times thinly and evenly by using a brush. 4. Let the adhesive dry overnight, however at least 10 hours. (Please do not resand). 5. Cover or design your model as always with the thermal shrink fabric covering ORASTICK®.
Productivity: approx. 1 tin / 1m²
Unsuitable for surfaces which are not resistant to organic solvents.
ORASTICK® SPECIAL THINNER
If our adhesives should dry a little bit in open containers, the adhesive can be adjusted again to brushing viscosity with the corresponding thinner.
|Type of Application||Self-Adhesive|
|Type of Article||Film|
|Width in mm||600|
|Length in m||10|
ORACOLOR 100 ml
scale cub yellow
basic price 12.95 € / 100 ml
* Our offer is aimed at final consumers. Therefore, all quoted prices include 19 % German VAT. Transport costs will be charged on top of that.
Pictures may differ from the original products. We cannot assume any liability for the product information given. Accessories shown in the pictures are not included in the delivery. All logos, descriptions and trademarks are property of the respective manufacturer. Subject to change and prior sale. Errors excepted.