Article is in stock ORACOVER AIR OUTDOOR width: 60 cm length: 2 m transparent magenta

29.90 €

basic price 14.95 € / 1 m
item number: 321-073-002
price incl. 19.00% VAT excl. shipping
Amount



The covering for light constructions. Wherever minimum weight is demanded, wherever weight has to be reduced to its limits, ORACOVER® AIR is the product to be applied. Whether indoor flyers, park flyers, blimps or airships are to be built, ORACOVER® AIR will do the covering job. In contrast to regular ORACOVER®, ORACOVER® AIR has no adhesive layer. The hotmelt adhesive is to be brushed onto the surface.

ORACOVER® AIR OUTDOOR (approx.23 µm), the best choice for more solid light aircraft, park flyers, etc. ORACOVER® AIR OUTDOOR has not only proved itself as covering film for model airplanes, but becomes more and more popular as base material for model sails.

RECOMMENDED ACCESSORY : ________________________________ ORACOVER® AIR Hotmelt Adhesive

ORACOVER AIR Adhesive (100 ml) 8.95 €

Unstable wood fibres can become insecure and can rip off due to the weight. The consequences would be wrinkling and in the worst case the complete peeling off of the fabric.

Our tip:

For an optimal pre-treatment of your wood surface we recommend to coat the surfaces to be ironed with ORACOVER® AIR Hotmelt Adhesive. The ORACOVER® AIR Hotmelt Adhesive penetrates the wood and sticks together the loose wood fibres of the heartwood. With that you reach an excellent three-D adhesion of the ORACOVER® AIR film with the surface. With the ORACOVER® AIR Hotmelt Adhesive you do not need a further pre-treatment of the wood anymore.

Application of the ORACOVER® AIR Hotmelt Adhesive:

1. Sand your wood completely and remove the swarf (vacuum). 2. Stir up well the contents of the tin. 3. Apply the ORACOVER® AIR Hotmelt Adhesive 1 – 2 times thinly and evenly by using a brush. 4. Let the adhesive dry overnight, however at least 10 hours. (Please do not resand). 5. Cover your model as always with the thermal shrink fabric covering ORACOVER® AIR.

Productivity: approx. 1 tin / 1m²

Unsuitable for surfaces which are not resistant to organic solvents.

ORACOVER® AIR SPECIAL THINNER

If our adhesives should dry a little bit in open containers, the adhesive can be adjusted again to brushing viscosity with the corresponding thinner.

ORACOVER  AIR Special thinner (250 ml) 9.50 €

Type of Application Air - ohne Kleber
Type of Article Film
Width in mm 600
Colour Code 073
Colour magenta
Colour Series transparent
Length in m 2

Please enter your question and we will response immediately

Legal notice:

* Our offer is aimed at final consumers. Therefore, all quoted prices include 19 % German VAT. Transport costs will be charged on top of that.


Pictures may differ from the original products. We cannot assume any liability for the product information given. Accessories shown in the pictures are not included in the delivery. All logos, descriptions and trademarks are property of the respective manufacturer. Subject to change and prior sale. Errors excepted.


Lade ...