Article is in stock ORASTICK width: 60 cm length: 10 m chrome

119.50 €

basic price 11.95 € / 1 m
item number: 25-090-010
price incl. 19.00% VAT excl. shipping
Amount



IMPORTANT INFORMATION:

Do not run the RX aerial underneath chrome coloured ORACOVER® or ORASTICK® films as the back of these chrome films is metallised with a very thin aluminium layer which may disturb the reception of signals.

ORASTICK® self-adhesive Chrome Colours are available in the original 'metal chrome' as well as in coloured chrome shades.

ORASTICK® is a pressure-sensitive, heat-set, self-adhesive covering film. ORACOVER® and ORASTICK® share the same unique qualities and can easily be applied together on the same model. The main difference is the adhesive: while the ORACOVER® adhesive is thermo-active, ORASTICK® is self-adhesive.

RECOMMENDED ACCESSORY : ________________________________ ORASTICK® Hotmelt Adhesive

ORASTICK Bonding emulsion (100 ml) 6.95 €

Unstable wood fibres can become insecure and can rip off due to the weight. The consequences would be wrinkling and in the worst case the complete peeling off of the fabric.

Our tip:

For an optimal pre-treatment of your wood surface we recommend to coat the surfaces to be ironed with ORASTICK® Hotmelt Adhesive. The ORASTICK® Hotmelt Adhesive penetrates the wood and sticks together the loose wood fibres of the heartwood. With that you reach an excellent three-D adhesion of the ORASTICK® film with the surface. With the ORASTICK® Hotmelt Adhesive you do not need a further pre-treatment of the wood anymore.

Application of the ORASTICK® Hotmelt Adhesive:

1. Sand your wood completely and remove the swarf (vacuum). 2. Stir up well the contents of the tin. 3. Apply the ORASTICK® Hotmelt Adhesive 1 – 2 times thinly and evenly by using a brush. 4. Let the adhesive dry overnight, however at least 10 hours. (Please do not resand). 5. Cover or design your model as always with the thermal shrink fabric covering ORASTICK®.

Productivity: approx. 1 tin / 1m²

Unsuitable for surfaces which are not resistant to organic solvents.

ORASTICK® SPECIAL THINNER

If our adhesives should dry a little bit in open containers, the adhesive can be adjusted again to brushing viscosity with the corresponding thinner.

ORASTICK Special thinner for 9.50 €

Type of Application Self-Adhesive
Type of Article Film
Width in mm 600
Colour Code 090
Colour chrome
Colour Series chrome
Length in m 10

Please enter your question and we will response immediately

Legal notice:

* Our offer is aimed at final consumers. Therefore, all quoted prices include 19 % German VAT. Transport costs will be charged on top of that.


Pictures may differ from the original products. We cannot assume any liability for the product information given. Accessories shown in the pictures are not included in the delivery. All logos, descriptions and trademarks are property of the respective manufacturer. Subject to change and prior sale. Errors excepted.


Lade ...